Stegu primer

  • Exterior
  • Exterior

Sorry, this entry is only available in American English, Polish, German, French, European Spanish, Romanian, Irish, Български, Dutch, Slovenščina and Österreichisches Deutsch. For the sake of viewer convenience, the content is shown below in this site default language. You may click one of the links to switch the site language to another available language.

STEGU primer is a surface priming agent, manufactured from highest quality acrylic resins. It strongly binds surface layers to form a uniform hydrophobic (waterproof) coating.

For priming inside and outside concrete, cellular concrete, plasterboard, gypsum. Used under ceramic tiles, paints, wallpapers, adhesives, concrete floors and screeds: perfectly reduces surface absorption, improves adhesion, eliminates dusting and excessive wear.

Method of application:
The surface for priming must be dry. Remove all dust, dirt, oil, grease, etc. Apply the STEGU PRIMER by brush, roller or spray. Highly absorbent surfaces should be coated two or three times. For priming plasterboards, the STEGU PRIMER should be diluted with water in a ratio of 1:1. The interval between applying successive layers should be approx. 4 hours. During priming, the temperature of the surface should be between + 5°C and + 30°C.

Efficiency: to 50 m2 per container.

Storage: Store at + 5°C to + 30°C in originally sealed packaging.

Shelf life: 12 months from the date marked on the package.

S 2
– keep out of the reach of children.
S 26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Hygienic certificate in accordance with the Polish National Institute of Hygiene: 56/769/61/2010